Now Sold.
Coot Dinghy.
Designed by Andrew Wolstenholme
LOA 10ft 11ins.
LWL 10ft 9ins.
Beam 4ft 7ins.
Sail Area 70 sq ft.
Robbins Elite BS1088 Gaboon (Okoume) Marine Ply
The transom, keelson, keel and stem are Douglas Fir.
The thwarts, gunwales and tiller are Sweet Chestnut.
The Hull is finished in Blakes (Hemples) Pearl White.
Cat-Gaff rigged.
All Spars are Douglas Fir.
The sail was made by Steve Hall at North Sea Sails at Tollesbury in Essex in 4oz Cream Terylene / Dacron.
It has contrasting brown stitching, brass grommets, roped edges and leathered corners.
It has contrasting brown stitching, brass grommets, roped edges and leathered corners.
Two rows of reefing points set up with single line reefing.
Blocks by Barton and SeaSure.
Braided lines.
Two rowing positions with bronze crutches and sockets,
one pair of 7ft oars.
one pair of 7ft oars.
Made to measure boat cover.
Good combi-trailer.
Watercraft Amateur
Boat Building Award Winner, Beale Park 2011.
Featured in Watercraft Magazine No. 88 - 89
.jpg)
Recent Photos taken April 2018
Barton Broad May 2011
Made to Measure Cover by Trident UK.
On Display at Beale Park Boat Show where she won her section in the WaterCraft Amateur Boat Building Awards.
Taking Part in the HBBR Thames Raid II, Pangbourne to Walton-on-Thames
